Suzhou Hengrui Import & Export Co., Ltd.
Main products:Artificial grass,Solar product,Sports Goods,Sweaters,Gifts & Crafts,Apparel and Fashion,Children Product,Textiles & Leather Products,Chemicals,Pen product,Home Supplies,Pet products,Furniture & Furnishings,Bathroom products,Hotel Amenities,New
Products
Contact Us
  • Contact Person : Mr. Wang Jisheng
  • Company Name : Suzhou Hengrui Import & Export Co., Ltd.
  • Tel : 86-512-68610242
  • Fax : 86-512-68299896
  • Address : Jiangsu,Suzhou,14/F, International Trade Building, 6 Xihuan Road, Suzhou City, Jiangsu Province. China
  • Country/Region : China
  • Zip : 215104

Spot Welder

Spot Welder
Product Detailed
Related Categories:Dental Equipments
Related Product Searches:Spot Welder,High Quality,Spot Welder, Spot Welder,HL-IV
Spot Welder is used for the dentistry to remedy and repair the welding of stainless steel wire. factory!!!

Operation method:

1.      Welding method

1.1       Choose suitable electrode group according to the weldment demand, check the electrode, if it was oxidized, and the point of weld should be polished smoothly with sandpaper and polishing file firstly.

1.2       The weldment needs to cleanliness, no oxidization, without greasy dirt etc.

1.3       Connect the power supply, turn on the power switch, press the mode switch key-press (No. 11) to set up the welding mode views dXX (X means numeral value, same as follows) and according to the size of the welding material, choose suitable welding power (find attachment test parameters), use↑button (No.1) increase the power, use↓button (No.12) decrease the power.

1.4       Press to the welding pressure pad (No. 7), put the demand weldment to the top and bottom electrode, then relax the welding pressure pad slowly, make sure the top and bottom electrode compressed the weldment tightly. Press Start button (No.10) or feet step switch (No. 9) after confirm the right welding point. Then it will put out energy between the top and bottom electrode to welding. After finished output, relax the electrode arms, dismantle the weldment, and then carry on next welding.

2.      Heat treatment method

2.1       Firstly put mode plate (attachment is a piece of Plastic Bracket that hangs on between top and bottom electrode arms) between top and bottom electrode arms, opening top and bottom electrode arms, then set the machine on heat treatment state through the mode set button, views h-X.

2.2       According to the diameter and length of arch, and heat treatment pole, set up suitable heat power, use ↑, ↓ to adjust.

2.3       Press the pressure plate, apart the two electrodes with plastic bracket. (If not apart the electrode, when Start, it will view Err, beep alarm).

2.4       Operation heated holder clip the arch between heat treatment poles, press start button or step upon foot switch, then the back-fire poles will output energy to advance heat operation, releases start button (or feet step switch) to stop heating. After heated, relax the holder, life down the arch then carry on next heat.

3.      Braze welding method

3.1       Choose suitable electrode group according to weldment demand, check the electrode, if it was oxidized, and the point of weld should be polished smoothly with sandpaper and polishing file firstly.

3.2       The weldment needs to cleanliness, no oxidization, without greasy dirt etc.

3.2   The piece of welder needs to cleanliness, no oxidization, without greasy dirt etc.

3.3       Connect the power supply, turn on the power switch, through the mode switch key-press button to set up braze welding, shows q_X, and according to the specifications of the welding material, choose the suitable power of braze welding.

3.4       Press to the welding pressure pad, wipe welding paste between the two welding material, put two welding materials into the top and bottom electrode, make sure the two welding material was compressed tightly, then relax the welding pressure pad slowly. Press the start button or feet step switch after confirmed the right position of the welding point. Then it will put out energy between the top and bottom electrode to welding. Complete braze welding after release start button (or feet step switch). Relax electrode arms when finish welding, dismantle the welding material, and then carry on the next welding.

4.      Control panel button operation:

a)      In stand-by state, short time press top right button (↑): Power display screen shows value increase 1,the value will jump to lower limit when increased to upper limit automotive.

b)      In stand-by state, short time press right middle button(↓): Power display screen shows value decrease 1, the value will jump to upper limit when decrease to lower limit automotive.

c)      In stand-by state, short time press (MODE) button: the value of bulletin of decision digital tube changed once, it will circulate with dXX, q_X, h_X three types. The meaning indicates: spot welding, braze welding, backfire welding, press this button a long time, only respond one time (X shows input value, same as follows).

d)      Stand-by state, digital indicate dXX means spot welding mode, no status block between electrodes, press (START) button to carry on welding, press this button a long time, and only respond one time.

e)      Stand-by state, digital show h_X means heat treatment, put status block between electrodes, press (START) button to carry on heat, relax the button will stop heating immediately.

f)        Stand-by state, digital show q_X means braze welding mode, no status block between electrodes, press (START) button to carry on braze welding, relax the button will stop braze welding immediately.

g)      Stand-by state, ensure current function mode same as the system mode totally when press (START). Or the buzzer couldnt work, it will shows Err, press this button a long time, it only respond one time.

h)      Press each above button, buzzer will respond.

i)        If buzzer responds endless, seems it didnt work at present.

Announcements:                

1.              Must use the list mutually three-line power supplies, guarantee that the machines cover connect to the earths, to insure the safety.

2.              Put the machine to the dependable place.

3.              Use AC stabilized supply, if possible, since it can guarantee the welding power stability, and it can reduce the machines affection to other electric appliance.

4.              The electrode must be rotated with clockwise.

5.              Operate under the welding and heating status, according to the operation method, put the status block in correct position and set the status button correctly, besides, whenever operating in which status, electrodes and backfire poles must output at the same time, so during welding, dont touch the heat treatment poles and vice versa.

6.              When the welding power is bigger, or the weld material get in bad touch, prevent the splash thing burn human body, the operator must use the protection glasses and protection gloves.

7.              After finish using, wipe the machine clean, then put it at dry and well-ventilated place, and have no causticity air indoor.

8.              When the machine breaks down, contact the factory or be fix by the professional personnel in time.

Spot Welder



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.